FAG Taper Roller Bearing

1. FAG Taper Roller Bearing  Single-row tapered roller bearings The axial load in any direction can be borne by the single-row tapered roller bearings and can limit the axial displacement of the shaft to the bearing seat. Even under the action of pure radial load, the tapered roller bearing will generate additional axial component force inside the bearing. At this time, an equal amount of reverse force is needed to balance. Single row spherical roller bearings are usually installed on two brackets with the same structure, and are installed in pairs face to face or back to face. Of course, single row tapered roller bearings are also available in face-to-face or back-to-back configurations.

2. FAG Taper Roller Bearing  Tapered roller bearings with stop ribs

Round roller bearings have a stop rib, which is usually installed on the outside. The internal components are the same as single row tapered roller bearings. Push roller bearings with stop ribs can axially position the bearing seat, simplifying the bearing configuration design and the structure of the bearing seat.

3.FAG Taper Roller Bearing  Double row tapered roller bearings

Double row circular roller bearings can bear both radial loads and bidirectional axial loads. The gap has been adjusted before the product leaves the factory and can be installed and used directly without adjusting the gap. Double row tapered roller bearings can limit the axial displacement of the bearing relative to the bearing seat in both directions.

4.FAG Taper Roller Bearing  Four-row tapered roller bearings

The performance of four-row tapered roller bearings is basically the same as that of double-row circular roller bearings, but its ability to withstand radial loads is stronger than that of double-row circular roller bearings. Four-row circular roller bearings have a low limit speed and are mainly used For heavy machinery such as rolling mills.