Truck Parts Clutch Release Bearing For Sinotruck Volvo Hino

Precautions when installing the Truck Parts Clutch Release Bearing For Sinotruck Volvo Hino

1. Pressure plate positioning: There are 6 screw mounting holes on the clutch pressure plate. Two of the screw mounting holes are slightly larger and are arranged opposite each other. There are small holes on each edge, which are the pressure plate positioning holes;

2. Oil pollution: It is strictly forbidden to touch the clutch pressure plate with oily hands, rags and other oily objects;

3. Clutch splines: The spline teeth of the clutch plate should be able to slide freely on the first shaft teeth of the transmission;

4. Screw tightening: All bolts should be tightened according to the specified torque, diagonally alternately, and in multiple times;

Adjustment after Truck Parts Clutch Release Bearing For Sinotruck Volvo Hino installation

After installation, check the free gap between the release bearing and the diaphragm spring or the free gap of the clutch pedal;

The free travel of the clutch rocker arm is 2mm-4mm; the free travel of the clutch pedal is 15mm-25mm;

Driving precautions after Truck Parts Clutch Release Bearing For Sinotruck Volvo Hino installation

Vehicles that have just had the clutch pressure plate and clutch plate replaced should pay attention;

1. Overloading; 2. Long-term use of half-clutch; 3. Avoid high-speed starts;

Regular clutch adjustment

During long-term use, due to normal wear of the clutch plate, the free stroke of the clutch pedal will gradually increase, so regular inspection and adjustment are required. Otherwise, the clutch may not be completely separated, resulting in abnormal gear shifting noise, burnt discs, etc.